Welcome Guest [Log In] [Register]
Active Topics

Welcome to Kawasaki Owners Club. We hope you enjoy your visit.

We specialise in technical information & assistance for anyone seeking advice for all Kawasaki motorcycles.
To gain access to all Forums you will need to become a member.
This site is ad free to members.

Would new members please post a hello in Welcome to the forum before asking questions on the board


Join Kawasakiownersclub.com!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Kawasaki KZ 1000 fuel lines; Size of fuel lines
Topic Started: Dec 19 2013, 01:18 PM (1,770 Views)
Fatboy578
Member
[ *  * ]
Hello. I just bought a 1978 Kawasaki KZ 1000 LTD in fantastic shape. It just needs the carbs to be overhauled and engine gaskets as oil is leaking, normal for 35 years. I am trying to find out the size of the fuel lines as I tried to Google it but it did not tell me anything conclusive. I need to replace all the lines and waned to know if anyone knew? I also need to send the carbs to get them rebuilt, glass beaded so they look like new and work as new carbs. Does anyone know who does carb rebuilds? I pulled them off the bike, and I was lucky to find NOS boots for them when I put them back on. nice new rubber. I posted a couple of pics below. Thanks for your help,Larry
Attached to this post:
Attachments: IMG_0554.jpg (3.81 MB)
Attachments: IMG_0565.jpg (2.01 MB)
Edited by Fatboy578, Dec 19 2013, 02:48 PM.
Offline Profile Quote Post Goto Top
 
Mike Folks
Mike Folks
[ *  *  *  * ]
I've owned a 1977 Kz1000, and now own a 1982 GPz 1100 B2 model. The stock I.D. fuel lines are 5/16" (.312"), and will fit the carb and petcock fittings, using small worn style hose clamps, but I'd imagine the small, black tie wraps would work, if snugged down, with a pair of needle nose pliers.

For carb overhauls/rebuilds, look here:

Carb Service
http://www.wgcarbs.com
http://motorcyclecarburetorrebuild.com/
http://www.vintagecarbs.com/Home_Page.html
http://www.oldskoolcarbs.com/
Offline Profile Quote Post Goto Top
 
Wizz
Member Avatar
Site Administrator

When I changed the fuel lines on my LTD I just took an old line down to the local motor factors and matched it up... :111
Offline Profile Quote Post Goto Top
 
Fatboy578
Member
[ *  * ]
Fatboy578
Dec 19 2013, 01:18 PM
Hello. I just bought a 1978 Kawasaki KZ 1000 LTD in fantastic shape. It just needs the carbs to be overhauled and engine gaskets as oil is leaking, normal for 35 years. I am trying to find out the size of the fuel lines as I tried to Google it but it did not tell me anything conclusive. I need to replace all the lines and waned to know if anyone knew? I also need to send the carbs to get them rebuilt, glass beaded so they look like new and work as new carbs. Does anyone know who does carb rebuilds? I pulled them off the bike, and I was lucky to find NOS boots for them when I put them back on. nice new rubber. I posted a couple of pics below. Thanks for your help,Larry
I found out that the lines are 1/4 inch. Sent he carbs out to be rebuilt and should have them this week. Cannot wait to install them and fire it up. Bike ran great, carbs were leaking from age. Had them completely restored.
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Kawasaki Chat · Next Topic »
Add Reply





© KOC


Copyright © 1999-2018 All rights reserved www.kawasakiownersclub.com






eXTReMe Tracker